ylzz永利总站(中国)官网

您好,欢迎访问ylzz永利总站官网网站!​

当前位置: 当前位置:首页>Products>Mine DTS

Mine DTS

Mine DTS

       As the main energy of industrial production in China, coal mine has an incomparable position with other energy sources. The safety production of coal mine has been put in the first place of coal mine production. With the continuous mining and extension of the mine, the goaf has become one of the important dangerous sources in the coal mine. Especially once the goaf is ignited, it is impossible to detect and locate the ignition point, which brings difficulties to rescue and even causes gas and coal dust explosion. Therefore, the safety monitoring in goaf is of great significance to reduce the loss of life and property.


1630509852169676.png1630509856580738.png


In order to solve the problem of goaf safety monitoring, our company develops a mine DTS, which monitors the temperature of goaf to prevent the natural phenomenon when the temperature rises. Through the distributed temperature measurement technology, real-time monitoring of the temperature change of the residual coal in the goaf, when the temperature is abnormal, the system will give an alarm and assist manual control, which can prevent the natural occurrence of coal and greatly reduce its probability.
System Principle
         The distributed optical fiber temperature measurement system (DTS) detects the temperature changes along the different positions of the fiber according to the optical time-domain reflection of the optical fiber and the temperature effect of Raman scattering in the fiber, so as to realize the real distributed measurement. In the system, the optical fiber is not only a transmission medium but also a sensing medium. The temperature field of each point in the space where the optical fiber is located modulates the intensity of Raman scattering light in the optical fiber. The space temperature information is collected by wavelength division multiplexer and photoelectric detector, and then the temperature information is extracted from the noise in real time after the system is demodulated. The temperature point is located by using the propagation velocity of light wave and the time interval of back light echo.
1630509861107438.png
System Features
  • The sensor is optical fiber, without power supply, intrinsically safe!

  • Optical fiber is used as both sensor and transmission medium, so the system structure is simple;

  • Optical fiber has the characteristics of electrical insulation, intrinsic safety and anti electromagnetic interference;

  • It can realize long-distance and large-scale distributed continuous real-time temperature monitoring, especially suitable for long-distance and large-scale applications; it can accurately measure the temperature value of any point along the optical fiber without measuring blind area, which is not only large in information but also intuitive in effect;

  • It can measure the temperature change of the measured object sensitively and provide the ability of early detection of abnormal hot spot;

  • The material of optical fiber core is silica, and the optical fiber sensor is corrosion resistant and has long service life;

  • Optical fiber has good flexibility and flexible installation position, which can meet the needs of different installation positions in different projects;

  • High reliability, high sensitivity and high precision.

It is especially suitable for coal mine goaf, transmission belt, high-voltage cable and other large-scale temperature monitoring
System Composition
1630509874165824.png
Mine DTS 
20200820_154142.jpg
  • Using advanced optical pulse control and detection technology, high spatial resolution;

  • The integrated functional devices and optical modules of carrier level are compact in structure;

  • Embedded control and equipment status self diagnosis;

  • Low power consumption, hot swap design;

  • Wide temperature range without drift;

  • High reliability;

  • Bluetooth communication;

1630509885177703.png


Baidu
sogou